Home > Products > French Fries Machinery >

Crispy Potato Straws Production Line
  • Capacity:100-5000kg/h
  • Processing Objects: potatoes
  • Application: straw potato fries, french fries
Features
Straw potato fries are a type of snack food (basically just potato) and are considerably thinner than normal french fries with a much crispier texture. A very automated and stable straw potato fries production line is required to make the potato straws.
 

What are 'straw potato fries"?

Straw potato fries are made from fresh potatoes which are washed, peeled and cut into very thin strips. The strips are then processed (rinsed, dewatered and deep fried) to make the final product.
The most obvious difference between straw potato fries and normal french fries is in their size. Normal french fries have a much larger cross section, the straw fries are considerably thinner. Their exact dimensions can be tailored to the product and to the market position required, e.g. 2x2mm, 2.5x2.5mm or 3x3mm.
 

Main processing workflow for a potato straws production line

The overall flow of the potato straws production line is pretty much the same as for a standard french fry line. The main differences are in the blade on the cutter and the size of the end product. A typical industrial processing workflow is as follows:
Step 1: Washing and peeling
Fresh potatoes go into a washing machine where they're subjected to a system of rotating drums, brushes and water jets to remove the skins, the soil and all the other detritus.
potato feeding
Step 2: Sorting and trimming
The potatoes are inspected (either by hand or on a conveyor) to remove any that are rotted, discoloured or otherwise unsuitable for processing. This is to ensure the quality of the raw material.
Step 3: Cutting into potato strips
This is the critical stage in terms of defining the product specification. A professional strip cutter with the appropriate blade assembly is used to cut the potatoes into uniform thin strips. Different blade assemblies can be used to produce strips of different sizes.
potato cutting
Step 4: Rinsing and pre-treatment
Once cut the strips go into a rinsing unit which removes the excess surface starch and prevents them sticking together in the following stages. A blanch in may also be included depending on the process to improve colour and processing stability.
Step 5: Dewatering and frying
After rinsing or blanching the potato strips are de-watered to reduce the surface moisture. They are then fed into a continuous fryer where the oil temperature and fry time are carefully controlled to achieve the required colour and crispness.
Step 6: Cooling, seasoning, and packaging
Depending on the product positioning various seasonings are applied. The product is then portioned and sealed using automated packaging equipment.
fries packaging machine 

Advantages of the straw potato fries production line:

1. Flexible product specifications and capacity customization
The potato straw line is capable of varying the cut to meet market requirements (e.g. 2x2mm, 2.5x2.5mm, 3x3mm etc). The equipment and production capacity can be set up to suit the way you want to operate.
2. High level of automation, reducing manual labor
Equipped with a PLC control system and a touchscreen interface the line allows for centralised control of the key stages of the process (conveying, processing and frying). Some of the components are variable frequency speed controlled which allows for adjustment of operating speeds and improves the stability of the process.
3. Precise control over frying quality
Continuous fryers enable very precise control of oil temperature, conveyor speed and fry time so that the shredded potato products come out with a consistent colour and a crisp texture. They can also be fitted with automatic oil filtration to reduce the build up of food in the oil and thus extend the life of the oil.
4. Comprehensive manufacturing and service capabilities
We have a 12,000 sqm production facility with full in house capability for equipment R&D, design and manufacture. We supply CE certified machinery to the exact specification of the project and provide full professional support including on site installation, commissioning, operator training and after sales technical support.
 

FAQ – straw potato fries production line

Q1: Can the production line produce strips of different sizes?
Yes. By changing the cutting blade assembly you can produce potato straw of various cross section; specific specs can be tailored to customer requirements.
Q2: What is the output of the straw potato production line?
Capacity is dependent on the equipment configuration and the product specifications. We can produce at capacities ranging from 100 kg/h to 5,000 kg/h.
Q3: Can the potato straws production line produce frozen straw potato fries?
Yes. With the introduction of in-line quick freezing equipment the production line can produce potato strips for frozen storage and for supply to the food service sector.
Technical Data
FAQ

1, How much is the machine cost?
Answer: Different models have different price, just tell us your requirement, our sale will suggest you suitable model and price.
2, What is the raw material of your machine?
Answer: Our machines are made of stainless steel material, if you have special requirement for the machine, just feel free to tell us.
3, What if the voltage can't fit our country?
Answer: The voltage can be customized, just tell us before the machine is made.
4, For the frying machine, which heating way is better?
Answer: Dear, we have gas heating and electric heating, also can be customized. You can choose the suitable one according to your need.

Leave Your Message
If you are interested in our machine or any question, don't hesitate to contact us.
Security Code

Related Products

Get A Quote

Number Change